ATC Loudspeakers (Professional)


ATC, Acoustic Transducer Company, is a specialist British manufacturer of loudspeaker drive units and complete sound reproduction systems, including the relevant electronic equipment. All systems and components are designed and built in-house, to achieve levels of performance far in excess of the industry norm. This is achieved by adopting a thoroughly professional engineering approach to the issue of basic design, materials science and production technology.

Through ATC’s commitment to multi-channel mastering and its direct involvement with leading players in the professional audio industry including Sony Music and Telarc, ATC’s products are installed at some of the world’s most prestigious multi-channel studios and auditoria. Where ever the best is required you will find ATC.

Bhalerao Enterprises is an Authorized Dealer of ATC Professional products in India.

SCM20PSL Pro

ATC Loudspeakers | India | Bhalerao Enterprises

Overview

  • Compact very high performance passive 2-way studio monitor
  • Ideally suited to: – critical near-field listening applications in all control rooms – LCR surround monitoring in small-to-medium control rooms – surround channels in medium-to-large contol rooms
  • Proprietary ATC 150mm/6” Super Linear Mid/Bass Driver
  • Proprietary ATC 25mm/1” Dual Suspension ‘S-Spec’ Tweeter

Specification

  • Drivers: LF 6.5”/150mm Super Linear, HF 1”/25mm Dual-Suspension ‘S-Spec’ Tweeter
  • Amplitude linearity : 80Hz – 20kHz (+/-2dB)
  • Cut-off frequencies : 55Hz – 25kHz (-6dB freestanding)
  • Dispersion : +/-80° coherent horizontal, +/-10° coherent vertical
  • Maximum continuous SPL : 108dB (per pair @ 1m)
  • Crossover frequency : 2.1kHz
  • Recommended Amplifier Power: 75 to 300 Watts
  • Nominal Impedance : 8 Ohm
  • Connectors : 2 x Pairs Binding Posts/4mm Plugs – Bi-Wireable
  • Cabinet Dimensions (HxWxD) : 450x250x294mm (17.7″x9.8″x11.6″)
  • Weight : 18kg/39.7lbs (per cabinet)

 

SCM20ASL Pro

ATC Loudspeakers | India | Bhalerao Enterprises

Overview

  • 25mm soft dome HF unit.
  • Full “SL” spec ATC bass driver with integral 75mm soft dome.
  • 9kg precision machined and optimised motor assembly.
  • LF contour control
  • On board ATC built two way 250W Bi-Amp Pack
  • Heavily damped Aluminium cabinet
  • 5 year warranty

Specification

  • Drivers: HF 25mm, Mid/LF 75/150mm
  • Amplitude Linearity (±2dB): 80Hz-17kHz
  • Cut-off Frequencies (-6dB, free-standing): 60Hz, 22kHz
  • Horizontal Dispersion: ±80°, Coherent
  • Vertical Dispersion: ±10°, Coherent
  • Max. Continuous SPL (1 metre): 108dB
  • Crossover Frequency: 2.8kHz
  • Input Connectors: Male XLR
  • Input Sensitivity: 1V
  • Input Sensitivity Trim: ±6dB
  • Input Impedance: Balanced > 10kΩ
  • Amplifier Output: Bass 250W, High 50W
  • Filters: Even Order Critically Damped
  • Overload Protection: Active FET momentary gain reduction plus thermal tweeter protection
  • Front Panel Indicators: Power On indicator, Gain Reduction warning
  • LF EQ: +6dB @ 40Hz
  • Dimensions (HxWxD): 448 x 270 x 310mm (17.6˝ x 10.6˝ x 12.2˝)
  • Weight: 30kg / 66lbs

 

SCM25A Pro

Overview

  • 25mm neodymium soft dome tweeter.
  • ATC hand built 3˝/75mm soft dome mid driver.
  • ATC hand built 7˝/164mm carbon-paper cone bass driver.
  • On-board grounded source 235W class A/B 3-way amplifier.
  • Compact size with high output and low cut-off frequency.
  • 19˝ rack mountable.
  • 5 year warranty.

Specification

  • Drivers: HF 25mm soft dome, Mid 75mm soft dome, LF 164mm short-coil carbon paper cone
  • Amplitude Linearity (±2dB): 74Hz-17kHz
  • Cut-off Frequencies (-6dB, free-standing): 47Hz-22kHz
  • Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
  • Max. Continuous SPL (1 metre): 109dB
  • Audio Input: Rear panel mounted female xlr (pin 2 +)
  • Input Sensitivity: 1V rms (ref. full output)
  • Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
  • Input Impedance: Balanced > 10kΩ
  • Amplifier Output Power: Bass 150W rms, Mid 60W rms, High 25W rms
  • Crossover Frequencies: 380Hz & 3.5Khz
  • Crossover Filters: 4th order critically damped with phase compensations
  • Low Frequency Boost: 0dB to +3dB at 40Hz (continuously variable via rear panel trimmer)
  • Overload Protection: Active FET momentary gain reduction
  • Dimensions (HxWxD): 264 x 430 x 369mm (10.4˝ x 16.9˝ x 14.5˝).  Handles add an 39mm/1.5″ to depth.
  • Weight: 30kg / 66lbs (per cabinet)

 

 SCM45A Pro

ATC | SCM45A Pro | India | Bhalerao Enterprises

Overview

  • Mid-size very high performance  active 3-way studio monitor
  • Ideally suited to: – critical near-field listening applications in all control rooms – LCR surround monitoring in medium control rooms – surround channels in medium-to-large contol rooms
  • ATC hand built 6.5˝/164mm carbon-paper cone bass driver.
  • ATC 25mm/1” Dual-Suspension ‘S-Spec’ Tweeter
  • Discrete MOSFET class A/B tri-amp pack with 150W/60W/25W continuous power output

Specification

  • Drivers: HF 1″/25mm Dual-Suspension ‘S-Spec’, Mid 3″/75mm Soft Dome, LF 6.5″/164mm short-coil carbon paper cone
  • Amplitude Linearity (±2dB): 70Hz-17kHz
  • Cut-off Frequencies (-6dB, free-standing): 42Hz-25kHz
  • Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
  • Max. Continuous SPL (1 metre): 112dB
  • Audio Input: Rear panel mounted female xlr (pin 2 +)
  • Input Sensitivity: 1V rms (ref. full output)
  • Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
  • Input Impedance: Balanced > 10kΩ
  • Amplifier Output Power: Bass 150W rms, Mid 60W rms, High 25W rms
  • Crossover Frequencies: 380Hz & 3.5Khz
  • Crossover Filters: 4th order critically damped with phase compensations
  • Low Frequency Boost: 0dB to +3dB at 40Hz (continuously variable via rear panel trimmer)
  • Overload Protection: Active FET momentary gain reduction
  • Dimensions (HxWxD): 353 x 600 x 375mm (13.9˝ x 23.6˝ x 14.8˝). Handles add an additional 39mm/1.5″ to depth.
  • Weight: 36kg / 79.2lbs (per cabinet)

 

SCM110ASL Pro

ATC | SCM110ASL Pro | India | Bhalerao Enterprises

Overview

  • ATC 25mm/1” Dual Suspension ‘S-Spec’ Tweeter.
  • Twin full “SL” spec 9˝/234mm bass driver.
  • ATC 75mm “Super Dome” mid driver.
  • On board ATC grounded source 350W Tri-amp pack.
  • LF contour control.
  • Clip indication.
  • 5 year warranty.

Specification

  • Drivers: HF 1″/25mm, Mid 3″/75mm, LF 2x 9″/234mm
  • Amplitude Linearity (±2dB): 50Hz-17kHz
  • Cut-off Frequencies (-6dB, free-standing): 30Hz, 22kHz
  • Horizontal Dispersion: ±80°, Coherent
  • Vertical Dispersion: ±10°, Coherent
  • Max. Continuous SPL (1 metre): 115dB
  • Crossover Frequencies: 380Hz, 3.5kHz
  • Input Connectors: Male XLR
  • Input Sensitivity: 1V
  • Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
  • Input Impedance: Balanced > 10kΩ
  • Amplifier Output: Bass 200W, Mid 100W, High 50W
  • Filters: Even Order Critically Damped
  • Overload Protection: Active FET momentary gain reduction plus thermal tweeter protection
  • Front Panel Indicators: Power On indicator, Gain Reduction warning
  • LF EQ: 0dB to+6dB @ 40Hz (continuously variable via rear panel trimmer)
  • Dimensions (HxWxD): 715 x 625 x 420mm (28.2˝ x 24.5˝ x 16.5˝) Depth with amplifier at rear adds 3˝
  • Weight: 73kg / 160.6lbs

 

SCM0.1/12SL

ATC | SCM0.1/12SL | India | Bhalerao Enterprises

Overview

  • ATC 12″/314mm bass driver.
  • Massive motor assembly.
  • In-house, hand wound precision flat wire coils.
  • ATC 200W amplifier
  • Active filters and overload protection
  • 5 Year warranty. 

Specification

  • Drivers: 314mm (12″)
  • Cut-off Frequencies (-3dB free standing): 18Hz & 250Hz
  • Max Continuous SPL: 112dB SPL @ 1 metre
  • Input Connectors: 2 xMale XLR
  • Input Sensitivity: 1V Balanced
  • Input Impedance: >10k Ohms
  • Common Mode Rejection: >90dB
  • Harmonic Distortion (amplifier): <0.01%
  • Amplifier Output Continuous: 650 Watts RMS
  • Dynamic: 1000 Watts
  • Overload Protection: Active FET momentary gain reduction
  • Gain Control Range: ±6dB
  • Contour Equaliser: 6dB lift @ 40 – 60Hz
  • Filter Characteristics: 50Hz, 60Hz, 70Hz, 80Hz, 90Hz low pass second order critically damped
  • Power Requirements: 100, 115, 230V (factory set for territory), 50/60Hz
  • Cabinet Dimensions (HxWxD): 581 x 530 x 530mm (22.9″ x 20.9″ x 20.9″)
  • Overall Weight: 68kg (150lb)