ADX-32B: 4X ADAT AND 1X MIDI OVER CAT5 - UP TO 330FT./100M
Use our ADAT Multicore Extenders to connect any number of ADAT compatible equipment with standard Cat5 network cabling. Reaches longer than fiber (330ft/100m), weights less than analog cable (only 1 Cat5 for 32 channels), is cheaper than MADI and more compatible than proprietary systems. The newest generation comes with additional features (like MIDI transmission) which have been often requested by our customers.
With a total capacity of 32 audio channels and MIDI connection over a single Cat5 cable, the ADX-32B is the right choice for building an inexpensive 24/8 multicore. The transmission direction can be set individually for each ADAT channels, and with an extension module, the ADX-32B can be upgraded later to an ADX-64B-PRO if you need more channels. On request, the ADX-32B is also available with a BNC wordclock output which simplifies wordclock distribution with your devices (e.g. preamps on stage).
MONITORING AND RECORDING SPLITS INCLUDED
All ADAT input are also looped through to the output jack alongside, often eliminating the need for additional signal splitters for monitoring and recording. If you still need more, you can daisy-chain multiple ADX units together and use them as extensible audio distribution system, e. g. for streaming audio data within buildings to multiple locations.
MIX & MATCH
Both device types are compatible and can be combined: For example, you can use an ADX-64B-PRO at your mix console, and two ADX-32B on stage (one located on the right and one on the left side). A simple ADAT splitter can be built by looping the Cat5 cables through on an ADX-64B-PRO. If you need a longer reach than 330ft/100m, an ADX-64B-PRO can also be used as Cat5 signal repeater by simply connecting ADAT In/Outs from the two submodules together. Imagine what else can be done...
|Radically reduced cabling and weight: a single Cat5 replaces 32 analog cables|
|Very cost efficient compared to other digital snakes|
|No noise, hum and disturbances, and a better SNR thanks to isolated digital transmission|
|Extremely low latency (<1µs)|
|Front panel LED indicators show status for each ADAT connection|
|Daisy-chaining possible for up to 32 devices|
|ADAT inputs are duplicated on the outputs, eliminating the need for splitters|
|Easy upgrade from ADX-32B to ADX-64B-PRO with upgrade module|
|Ruggedized anodized aluminum case with Neutrik EtherCon ® RJ45 connectors|
|Quality product „Made in Switzerland“|
Active ADAT-Splitter & Repeater The ADS-8 ADAT/Toslink Splitter allows you to connect any signal source to two sinks. The active design overcomes the limitations... View full product details
16ch Bidirectional ADAT/TOSLINK Extender Kit The ADX-16 Kit has been designed to overcome the length limitations (5m/16 ft) of optical TOSLINK® interconnects running ADAT Lightpipe®,... View full product details
ADX-64B-PRO: 8X ADAT, UP TO 2X MIDI AND WORDCLOCK OVER CAT5 - UP TO 330FT./100M Use our ADAT Multicore Extenders to connect any number... View full product details