JoeCo | BBR1U with Unbalanced analogue i/o:

Rs. 204,999.00

The BLACKBOX RECORDER is the first large-scale multi-channel recorder specifically designed for audio acquisition and capturing live performance. Developed to solve the inherent problems of working with computer-based systems in a live environment, it provides engineers with a computer-free, high-quality solution for live multi-channel audio capture.

Buy JoeCo: BLACKBOX RECORDER BBR1U on EMI for 3, 6, 9 & 12 months.

Collections: JoeCo, Recorders

Type: Recorders

The BLACKBOX RECORDER with Unbalanced i/o is designed to plug across the insert points of a standard analogue mixing console via three 25-way female D-type connectors on the rear of the unit. Three 1/4-inch TRS terminated multicore looms are supplied for connecting the BBR to the console (TASCAM analogue format). Inside the unit, relays route the audio signal from input to output in all modes except during playback. This provides an additional level of safety so that in the event of a power failure on the BBR, the audio through the PA will not be affected.

In this model, eight insert returns are also brought out to TRS jacks on the rear of the unit, allowing additional outboard equipment to be plugged into insert points as required.

Specifications:

Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz

Bit depths: 16bit; 24bit

Disk interface: USB2

Format: FAT32

File type: Broadcast WAV (BWAV)

Media: USB2 hard disk (7200rpm recommended), USB2 flash drive - 200x minimum (except for MADI and DANTE systems which have more demanding data rates), SHDC (Class 10 with suitable adapter except MADI and DANTE).

Monitoring: 1 x 1/4” TRS jack socket, headphone mix/ solo

Physical: 19” rack mounted 1U

Dimensions: (425mm x 150mm x 44mm)

Weight: < 2.4kg

Control and Synchronisation:

MIDI: 1 x 5-pin DIN (open loop) – MIDI time code (MTC) and MIDI machine control (MMC) protocol

LTC: 1 x 1/4” TRS jack socket: Frame rates supported: 30fps, 29.97drop fps, 29.97non-drop fps, 25fps, 24fps, 23.98fps

Machine control: 1 x 9-pin D, SONY PII protocol

Audio clock synchronisation: 2 x RCA sockets AES3 / SPDIF Format, also used for communications to slave units

Footswitch: momentary switch on ring of LTC TRS socket

Keyboard: 1 x mini DIN PS2 connector, Standard 102 key

Power: 9v – 16V dc (< 25W). 2.1mm dc inlet. PSU supplied

Analogue Inputs:

Levels: -10dBu / +4dBu switchable Max input level: +22dBu = 0dBFS A-D conversion: 24bit, 96kHz 106dB S/N, 96dB THD+N (typical A-weighted)

Analogue Outputs:

Levels: -10dBu / +4dBu switchable Max output level: +22dBu = 0dBFS D-A conversion: 24bit, 96kHz 106dB S/N, 94dB THD+N (typical A-weighted)

*Unbalanced i/o via 3 x 25way D-sub connectors (3 x ¼" TRS multicore looms supplied – TASCAM analogue format). Designed to plug across the insert points on a standard analogue console.